Call Today!
800-829-0225
800-829-0225
Roto-Pulse Dust Collectors
For Process Dust and Powder, Welding Smoke and Fumes, and Metalworking Dust(by Micro Air)
Micro Air® dust collectors utilize cartridge filtration and are available in a large range of configurations up to 24 cartridge models. All are sized and rated for the proper air-to-cloth ratio to solve a wide variety of applications such as weld smoke, powder dust, grinding dust, paper dust, etc.
Key to our models is a revolutionary new cleaning system called Roto-Pulse™. This is an on line system that continually cleans the filters with a revolving, compressed air driven, tube. As air enters the tube, the force of the pulse causes the tube to rotate. While spinning, air exits the pre-drilled holes in the tube. The result is that air hits the entire inside of the cartridge, pulsing dirt particles away from the filter for a much more efficient cleaning cycle.
Micro Air® dust collectors are designed and manufactured with standard features that set them apart from the competition. These include:
Key to our models is a revolutionary new cleaning system called Roto-Pulse™. This is an on line system that continually cleans the filters with a revolving, compressed air driven, tube. As air enters the tube, the force of the pulse causes the tube to rotate. While spinning, air exits the pre-drilled holes in the tube. The result is that air hits the entire inside of the cartridge, pulsing dirt particles away from the filter for a much more efficient cleaning cycle.
Micro Air® dust collectors are designed and manufactured with standard features that set them apart from the competition. These include:
RP6 Roto-Pulse
Dust Collector
Send Email about products on this page
Go to Inquiry Form
or Call Us Today at 800-829-0225
Back to Top
or Call Us Today at 800-829-0225
Back to Top
- Roto-Pulse™ Cleaning: Provides a much more efficient cleaning cycle for increased air flow and longer cartridge life.
- Gravity Flow Design: Dirty air always flows across the filters from top to bottom utilizing the natural downward force of gravity to get the particles to the filtration.
- Compact Design: A small footprint of only 42" x 48" allows Micro Air dust collectors to be located in virtually any area.
- Easy Maintenance and Installation: All electrical and air connections are outside the cabinet for easy installation and maintenance.
- After-Pulse is Standard: Micro Air provides an after-pulse cleaning cycle in addition to automatic on-line cleaning. This allows the unit to pulse the cartridges after power is shut off for an effective cleaning at the end of a shift.
- Complete Single-Source System Design: We can design and provide a complete dust control system including the collector and the ductwork to solve your particular problem. This is your assurance of the best possible total system supplied from a single source.
- In addition to our standard features, the model RP dust collectors have a broad range of options including explosion vents, HEPA after-filters, low profile options, a variety of different cartridges, and weather proof kits.
Roto-Pulse Filter
The exclusive Roto-Pulse™ self cleaning cartridge filters allow maximum filtration efficiencies with product reclamation and extended filter life.
The Roto-Pulse™ self-cleaning cartridge system offers a smaller footprint, efficiencies up to 99.99% and a more cost effective solution than those using reverse or jet pulse cleaning. This is done by cleaning 100% of the filter rather than 60-70% typical with traditional methods. Effectively, Roto-Pulse provides more continuously cleaned filter area than the competition and can extend filter life significantly as well.
RP8 Dust Collector
Send Email about products on this page
Go to Inquiry Form
or Call Us Today at 800-829-0225
Back to Top
or Call Us Today at 800-829-0225
Back to Top
